English translation of the Norwegian library. Product names and original documents retain their source language. Model-specific maintenance steps have been reviewed; other text uses assisted translation. Check the original manual before work.

← Product search · Original images, demonstrations and manual
User guide · Vesta-006

Vesta Dør-/vindumagnet via IR-deteksjon

Coverage: Trinnvis batteribytte

Product image Vesta-006
Product Vesta-006 · Supplier product page

Manual for this product

Vesta-006 – open the original manual at Vesta

Battery/power: 1 × AAA, 1,5 V alkaline

Before you start: check the full model name. Agreement test/service with the alarm provider before opening. Keep fastening and placement. On real smoke or fire: manage the danger first.

This is an optical door contact, not a normal magnetic contact. Do not see directly into the IR detection area.

1. Take down or open

  1. Hold the Learn/Test area and carefully lift the front cover as described by the manufacturer. Leave the base in place.

2. Bytt batteri / lad

  1. Remove the AAA battery. Press Learn/Test 5–6 times.
  2. Insert a new alkaline AAA battery following the markings in the holder.

3. Put together and in place

  1. Refit the front cover to the base. Check that it is closed and secure.

4. Test and confirm normal operation

  1. Press Test once to enter three-minute test mode. Open and close the door and check the correct status on the panel.

Attach and Mount

  1. The sensor normally sits on the fixed door or window frame. Retain its orientation and distance from the surface it detects. Moving it requires a new range and open/close test.

Original images and technical drawings

Technical drawing is not installed here yet. Open the associated original manual and control model before demounting.

Check that the drawing and any variations in the original manual are consistent with the device. Sources checked 08.09.2026. The step marked as derived is not an explicit disunity instruction from the manufacturer.

Date: ________; · Battery type/number: ____________________________________________________________
Datasheets, photos and movies from Climax

Fra produsenten Climax

OPDC-1 · Vesta-modell: OPDC-1-F1

The manufacturer's side covers this model family. Check the protocols, frequency, power supply and variant in the Vesta manual before using technical values or mounting advice.

Description, specifications and images at Climax

Datasheets and product brochures

Climax Product Images (4)

The pictures show the manufacturer’s model family. Compare to your Vesta variant.

Vesta/By Demes: modellgrunnlag · Kontrollert 08.09.2026

Help when the product does not work

Wireless sensor: Read battery and connection state in the system. For low battery, use the model battery guide and check the battery type and whether it is replaceable. Note new metal objects or other changes near the sensor.

Choose the symptom and check the model scope before following the steps. This is troubleshooting, not a list of confirmed product defects.

General advice — model-specific fault procedure missing.

Door/window sensor: shows open when closed

Applies to: General advice for the sensor type — not a verified procedure for this model. Use the model manual for opening, battery type, testing and settings.

  1. Check that the message concerns the correct door or window. Close it fully and read the current state again.
  2. If the sensor uses a magnet, look for loose, displaced or damaged parts. Correct side and distance depend on the model.
  3. Arrange an open/close test with the monitoring service. Compare the actual position with current system state, not just old events.

Check the result: The correct zone changes between open and closed.

Stop and get help: If the fault persists, let the installer check alignment and any external contact. Do not add a loose magnet or bridge wires.

Background source / example model (not model verification): support.ajax.systems — open documentation

Find help for another product Contact support

Sources reviewed 9 September 2026. Not tested on your installation.