Vesta 1 inngangs-/utgangsmodul DIO-52
Coverage: Use and checks – service required for removal
Manual for this product
Battery/power: DIO-52-B: 3 × CR123 or 5 – 12 V DC; configuration must be confirmed
The device may have wired inputs/outputs and external power. The source requires that the main supply be disconnected by opening. The customer sheet therefore does not provide a general assembly recipe.
1. Take down or open
- Do not open the enclosure for this customer task.
4. Test and confirm normal operation
- Check the installation overview to identify what the input and output control.
- For a low-battery warning, arrange service with the correct variant and power supply details.
- After the work, test both the input and the controlled function.
Attach and Mount
- Keep the existing mounting and cables. Removal and new installation are not described as customer tasks in this guide.
Original images and technical drawings
Technical drawing is not installed here yet. Open the associated original manual and control model before demounting.
Check that the drawing and any variations in the original manual are consistent with the device. Sources checked 08.09.2026. The step marked as derived is not an explicit disunity instruction from the manufacturer.
Datasheets, photos and movies from Climax
Fra produsenten Climax
DIO-52 · Vesta-modell: DIO-52-F1
The manufacturer's side covers this model family. Check the protocols, frequency, power supply and variant in the Vesta manual before using technical values or mounting advice.
Description, specifications and images at Climax
Datasheets and product brochures
Climax product images (3)
The pictures show the manufacturer’s model family. Compare to your Vesta variant.
Vesta/By Demes: modellgrunnlag · Kontrollert 08.09.2026