English translation of the Norwegian library. Product names and original documents retain their source language. Model-specific maintenance steps have been reviewed; other text uses assisted translation. Check the original manual before work.

← Product search · Original images, demonstrations and manual
User guide · VESTA-157

Vesta temperatursensor

Coverage: Trinnvis batteribytte

Product image VESTA-157
Product VESTA-157 · Supplier product page

Manual for this product

VESTA-157 – open the original manual at Vesta

Battery/power: 1 × CR2032, 3 V lithium

Before you start: check the full model name. Agreement test/service with the alarm provider before opening. Keep fastening and placement. On real smoke or fire: manage the danger first.

Do not tear down the entire sensor just to access the battery drawer.

1. Take down or open

  1. Open the battery tray using a small suitable tool in the tray opening. Hold the sensor steady and avoid damaging the tray.

2. Bytt batteri / lad

  1. Remove the old cell. Insert a CR2032 with the positive (+) side facing up.

3. Put together and in place

  1. Push the battery tray fully back in. Leave the existing adhesive in place if the sensor is still securely attached.

4. Test and confirm normal operation

  1. Press the function button during the agreed range test. Check that the panel receives the signal and temperature.

Attach and Mount

  1. For a new adhesive pad: clean the mounting surfaces, attach the pad to the back and press the sensor firmly into position. Do not attach it to a rough surface or loose paint.

Original images and technical drawings

Technical drawing is not installed here yet. Open the associated original manual and control model before demounting.

Check that the drawing and any variations in the original manual are consistent with the device. Sources checked 08.09.2026. The step marked as derived is not an explicit disunity instruction from the manufacturer.

Date: ________; · Battery type/number: ____________________________________________________________

Help when the product does not work

Wireless sensor: Read battery and connection state in the system. For low battery, use the model battery guide and check the battery type and whether it is replaceable. Note new metal objects or other changes near the sensor.

Choose the symptom and check the model scope before following the steps. This is troubleshooting, not a list of confirmed product defects.

General advice — model-specific fault procedure missing.

Temperature sensor: implausible value or no update

Applies to: General advice for the sensor type — not a verified procedure for this model. Use the model manual for opening, battery type, testing and settings.

  1. Check the correct device, measurement unit and last update time. An old value is not a new measurement.
  2. Check whether the sensor or external probe has moved, is covered or is affected by sun, draughts or heat. Do not pull out a fixed probe.
  3. Compare with a suitable thermometer at the same location after stabilisation. Record the difference and time period for support.

Check the result: You can distinguish a stale/misplaced reading from a possible sensor fault.

Stop and get help: Do not change alarm thresholds to hide discrepancies. For frost risk or critical temperatures, contact the responsible person promptly.

Background source / example model (not model verification): vesta-guide.gitbook.io — open documentation

Find help for another product Contact support

Sources reviewed 9 September 2026. Not tested on your installation.