English translation of the Norwegian library. Product names and original documents retain their source language. Model-specific maintenance steps have been reviewed; other text uses assisted translation. Check the original manual before work.

← Product search · Original images, demonstrations and manual
User guide · VESTA-423-BLACK

Vesta Innendørs PIRCAM 720P-detektor

Coverage: Trinnvis batteribytte

Product image VESTA-423-BLACK
Product VESTA-423-BLACK · Supplier product page

Manual for this product

Additional manufacturer guidance for the procedure

VESTA-423-BLACK - open the original manual at Vesta

Battery/power: 3 × CR123, 3 V lithium

Before you start: check the full model name. Agreement test/service with the alarm provider before opening. Keep fastening and placement. On real smoke or fire: manage the danger first.

The black variant's own page specifically refers to VESTA-423 for manual and instructions.

1. Take down or open

  1. Loosen the bottom retaining screw with a Phillips screwdriver. Remove the cover from the base. Retain the base and bracket angle.

2. Bytt batteri / lad

  1. Remove all three batteries. Press the tamper switch or Function button twice.
  2. Insert three new CR123 batteries following the compartment markings.

3. Put together and in place

  1. Engage the top of the cover with the base first, close the lower part and secure the screw. Wait through the approximately 30-second warm-up.

4. Test and confirm normal operation

  1. Carry out the agreed walk test and check image transmission as well as motion detection.

Attach and Mount

  1. For bracket A, engage the base on the hooks and slide down, then secure the stabilising screw. Do not change the angle or pet settings during battery replacement.

Original images and technical drawings

Technical drawing is not installed here yet. Open the associated original manual and control model before demounting.

Check that the drawing and any variations in the original manual are consistent with the device. Sources checked 08.09.2026. The step marked as derived is not an explicit disunity instruction from the manufacturer.

Date: ________; · Battery type/number: ____________________________________________________________

Help when the product does not work

Connection type is not confirmed: check the model and manual before assuming it uses a battery. Record the current fault and visible changes; leave electrical troubleshooting to the installer.

Choose the symptom and check the model scope before following the steps. This is troubleshooting, not a list of confirmed product defects.

General advice — model-specific fault procedure missing.

Motion detector: unexpected alarm or no response

Applies to: General advice for the sensor type — not a verified procedure for this model. Use the model manual for opening, battery type, testing and settings.

  1. Check which detector and event are named in the alarm. Record the time and whether the system was armed.
  2. Look for furniture, curtains or objects blocking its view. Note changes involving heaters, sunlight, draughts or pets in the area.
  3. Do not rely on the LED alone as a functional test. Arrange a walk test with the monitoring service using the model test procedure; some detectors have a sleep period.

Check the result: An agreed test is registered from the correct detector.

Stop and get help: For repeated alarms or missed detection, contact the installer. Do not change sensitivity or position without checking coverage.

Background source / example model (not model verification): support.ajax.systems — open documentation

Find help for another product Contact support

Sources reviewed 9 September 2026. Not tested on your installation.