Vesta Trådløs stikkontakt F1 868MHz
Coverage: Step-by-step use, removal and refitting
Manual for this product
Battery/power: No battery switch function; power from socket
Do not hold the button while connecting power: this may start a factory reset.
1. Take down or open
- Switch off the connected appliance. Pull the smart plug straight out by holding the plug, not the cable. Do not open the housing.
3. Put together and in place
- Insert the smart plug into a suitable existing socket and connect an appliance within the plug's rated load.
4. Test and confirm normal operation
- Press the button briefly for on/off. Light on means on; light off means off. Then check the agreed app control.
Attach and Mount
- For new enrolment, put the panel in learning mode and hold the button for three seconds. This is unnecessary for ordinary unplugging and reinsertion.
Original images and technical drawings
Technical drawing is not installed here yet. Open the associated original manual and control model before demounting.
Check that the drawing and any variations in the original manual are consistent with the device. Sources checked 08.09.2026. The step marked as derived is not an explicit disunity instruction from the manufacturer.
Datasheets, photos and movies from Climax
Fra produsenten Climax
PSS-29 · Vesta-modell: PSS-29-R2
The manufacturer's side covers this model family. Check the protocols, frequency, power supply and variant in the Vesta manual before using technical values or mounting advice.
Description, specifications and images at Climax
Datasheets and product brochures
Climax product images (5)
The pictures show the manufacturer’s model family. Compare to your Vesta variant.
Vesta/By Demes: modellgrunnlag · Kontrollert 08.09.2026