English translation of the Norwegian library. Product names and original documents retain their source language. Model-specific maintenance steps have been reviewed; other text uses assisted translation. Check the original manual before work.

FireProtect Jeweller

Supplier item link

A direct supplier item link has not been confirmed for this entry. A general supplier website is not an item link.

Troubleshooting – step by step

Ajax Systems → Elotec → Sikkerhetsgruppen · Model entry, not confirmed Elotec article

Smoke and heat detector. This is the first FireProtect generation, not FireProtect 2.

Wireless · Jeweller

Elotec article number and purchase price: not retrievedColor, frequency and availability must be confirmed.

Use and Maintenance

Arrange maintenance and any test with the monitoring station before opening equipment. Note the model and location. Opening a device may trigger tamper even when the intrusion alarm is disarmed.

Battery Exchange: Main Batteries CR2; Reserve CR2032. Confirm the number of your device.

Remove the detector from SmartBracket and switch it off.
Loosen the screws and remove the back cover.
Replace the relevant battery group: CR2 for primary power or CR2032 for backup. Follow polarity markings.
Close the cover, secure the screws and switch on. Refit the detector.
Check battery and cover status and perform the manufacturer's functional test.

Use new, undamaged batteries. Do not mix new and old. Keep button cells unavailable for children. Battery status may take some time to update.

Original battery guide for this model

Ajax: original image for battery replacement. Follow the text and model in the source.

For installer: location and installation

Check the exact model, panel, region and connection type.
Open the original manual's location and installation section below.
Follow the model's illustrations for mounting, wiring and tamper protection.
Complete the relevant signal and functional tests before handover.

Open the model original installation section

Ajax: original model illustrations. Number explanation and assembly details can be found in the manual.

Documents and missing

User guide

Norwegian maintenance summary. Not a complete replacement for the original manual.

Originalmanual / installasjon

Model-specific original manual with illustrations.

FireProtect Jeweller user manual

Tekniske spesifikasjoner

Online specifications. Check variant and region; separate datasheet-PDF is not verified.

fireprotect-jeweller – spesifikasjoner

Produsent

Ajax Systems.

Ajax – modellside / dokumentasjon

Elotec

Suppliers provided by the Safety Group. Model Elotec article, product link and price have not been verified.

Elotec – general supplier page

Videos and software

General training channel. Model-specific film and own software connection are not verified.

Ajax Systems PRO – produsentens kanal

Help when the product does not work

Choose the symptom and check the model scope before following the steps. This is troubleshooting, not a list of confirmed product defects.

App reports tamper / enclosure open

Applies to: Ajax device with tamper monitoring; only if the app shows Enclosure / Tamper

Open Devices in the Ajax app, select the named device and read its enclosure/tamper state. Confirm the room and device.
Look for a loose cover or mounting bracket, or recent removal. Do not open the device just to check the alert.
If recently refitted, use the model mounting guide to seat it correctly. Arrange any opening with the monitoring service first.
Check the app state after refitting. An old event in the log is not the same as an active fault.

Check the result: The current enclosure state is normal/closed.

Stop and get help: For a damaged bracket or persistent alert, contact the installer. Do not disable tamper monitoring to hide the fault.

Sources: support.ajax.systems — open documentation

Find help for another product Contact support

Sources reviewed 9 September 2026. Not tested on your installation.