English translation of the Norwegian library. Product names and original documents retain their source language. Model-specific maintenance steps have been reviewed; other text uses assisted translation. Check the original manual before work.

MotionCam (PhOD) Jeweller

Supplier item link

MotionCam (PhOD) Jeweller, hvit
Item no. WP-866-C2 · Elotec

1,163.00 NOK · Excl. VAT

Open WP-866-C2 at Elotec ↗

MotionCam (PhOD) Jeweller, sort
Item no. WP-866-C2-B · Elotec

1,163.00 NOK · Excl. VAT

Open WP-866-C2-B at Elotec ↗

Select the correct item number if the supplier displays several variants on the same product page. Price snapshot from 9 September 2026.

Troubleshooting – step by step

Ajax Systems → Elotec → Sikkerhetsgruppen · Model entry, not confirmed Elotec article

Motion sensor with image verification and images of request when rights and configuration allow it.

Wireless · Jeweller

Elotec article number and purchase price: not retrievedColor, frequency and availability must be confirmed.

Use and Maintenance

Arrange maintenance and any test with the monitoring station before opening equipment. Note the model and location. Opening a device may trigger tamper even when the intrusion alarm is disarmed.

A complete Norwegian battery procedure is not verified for this variant. Use the model's original manual; do not use the procedure for a model with similar names.

Check after maintenance

Check that the cover and fastener are correct. Open the device in the app and check that errors are gone. Perform the model detection test before the plant is returned to normal operation.

For installer: location and installation

Check the exact model and supported panel before enrolment.
Choose a location with a clear view. The manufacturer's normal mounting height for this model is 2.4 metres.
Run signal and detection tests at the planned location.
Secure SmartBracket with screws as illustrated. Preserve the breakaway part that activates removal tamper.
Fit the device to its mount and check cover status and detection again.

Open the model original installation section

Ajax: original model illustrations. Number explanation and assembly details can be found in the manual.

Documents and missing

User guide

Norwegian maintenance summary. Not a complete replacement for the original manual.

Originalmanual / installasjon

Model-specific original manual with illustrations.

MotionCam (PhOD) Jeweller user manual

Tekniske spesifikasjoner

Online specifications. Check variant and region; separate datasheet-PDF is not verified.

motioncam-phod – spesifikasjoner

Produsent

Ajax Systems.

Ajax – modellside / dokumentasjon

Elotec

Suppliers provided by the Safety Group. Model Elotec article, product link and price have not been verified.

Videos and software

General training channel. Model-specific film and own software connection are not verified.

Ajax Systems PRO – produsentens kanal

Help when the product does not work

Choose the symptom and check the model scope before following the steps. This is troubleshooting, not a list of confirmed product defects.

App reports tamper / enclosure open

Applies to: Ajax device with tamper monitoring; only if the app shows Enclosure / Tamper

Open Devices in the Ajax app, select the named device and read its enclosure/tamper state. Confirm the room and device.
Look for a loose cover or mounting bracket, or recent removal. Do not open the device just to check the alert.
If recently refitted, use the model mounting guide to seat it correctly. Arrange any opening with the monitoring service first.
Check the app state after refitting. An old event in the log is not the same as an active fault.

Check the result: The current enclosure state is normal/closed.

Stop and get help: For a damaged bracket or persistent alert, contact the installer. Do not disable tamper monitoring to hide the fault.

Sources: support.ajax.systems — open documentation

Find help for another product Contact support

Sources reviewed 9 September 2026. Not tested on your installation.