Betjeningspanel
Supplier item link
A direct supplier item link has not been confirmed for this entry. A general supplier website is not an item link.
Troubleshooting – step by step
VESTA-425
Purchase price: 4 059,71 NOK excl. VAT
Norexa · 08.09.2026. Access, shipping and assembly are not included. Prices are not automatically updated.
QALLMAX TOUCHPANEL-3
Used to operate the alarm system and see available status.
Original manual and technical illustrations
Ikke avklart
Connection is not confirmed for this article. See the model's original manual before selection.
Fra produsenten Climax
TouchPanel-3 · Vesta-modell: QALLMAX TOUCHPANEL-3
The manufacturer's side covers this model family. Check the protocols, frequency, power supply and variant in the Vesta manual before using technical values or mounting advice.
Description, specifications and images at Climax
Datasheets and product brochures
Films and demonstrations (14)
Manufacturer’s functional demonstrations. These are not necessarily assembly or battery replacement videos.
Vesta/By Demes: modellgrunnlag · Kontrollert 08.09.2026
Documentation and gaps
No article is marked as complete documented. “Fews” means that a confirmed link is not found in the library, not that the document necessarily does not exist. The overview assesses registered sources; it is not a new check that all external links work.
- User guide
Available – Use and control – service at the time of demounting. Not fully verified.
- Original product documentation
Source page associated. Content and completeness must be assessed for the model.
- Installation guide
Installation/installation section found in original source. Complete installation manual is not confirmed.
- Data sheet
Manufacturer's PDF for the model family. Check Vesta variant.
- Product image
Product image tilgjengelig.
- Climax / produsent
Climax page for the model family; variant must be checked.
- Vesta
Product source from Vesta/GitBook associated.
- By Demes
Bekreftet produktlenke tilknyttet.
- Norexa
Article and purchase price can be found in the catalogue extract. Product link and supplier manual are not associated.
Help when the product does not work
Connection type is not confirmed: check the model and manual before assuming it uses a battery. Record the current fault and visible changes; leave electrical troubleshooting to the installer.
Choose the symptom and check the model scope before following the steps. This is troubleshooting, not a list of confirmed product defects.
General advice — model-specific fault procedure missing.
Control or alarm button: no confirmed response
Applies to: General advice for the sensor type — not a verified procedure for this model. Use the model manual for opening, battery type, testing and settings.
- Check that you are using the correct device for the system. Record lights, beeps and messages without repeatedly triggering alarms.
- If you need help now, use the agreed alternative contact method. A flash alone does not confirm that the monitoring service received an emergency signal.
- Arrange a test with the receiver and follow the model instructions for button presses or code entry. Obtain receiver confirmation.
Check the result: The correct command or test alarm is confirmed by the system/receiver.
Stop and get help: Do not test hold-up alarms without notice or share PINs. Contact support if confirmation is missing.
Background source / example model (not model verification): support.ajax.systems — open documentation