English translation of the Norwegian library. Product names and original documents retain their source language. Model-specific maintenance steps have been reviewed; other text uses assisted translation. Check the original manual before work.

← Product search · Original images, demonstrations and manual
User guide · IPC-D24-ZAS-L-B

Vesta utendørs 4MP 2,7-13.5mm vandalsikker dome Sort

Coverage: Use and checks – removal manual missing

Product image IPC-D24-ZAS-L-B
Product IPC-D24-ZAS-L-B · Supplier product page

Manual for this product

IPC-D24-ZAS-L-B - open the original manual at Vesta

Battery / Power: No customer exchange procedure for battery documented in this product sheet

Before you start: check the full model name. Agreement test/service with the alarm provider before opening. Keep fastening and placement. On real smoke or fire: manage the danger first.

Detailed opening, sealing, any memory card access and cable require the model installation manual. No generic cover direction is used.

1. Take down or open

  1. Leave the camera on its mount. The source does not explain how to release this housing or bracket.

4. Test and confirm normal operation

  1. Open the camera's live view in the agreed application. Confirm that it shows the correct location and updates.
  2. If recording is included: check a recent recording and its timestamp. Live view alone does not confirm recording.
  3. Note which functions fail and give the product code to support.

Attach and Mount

  1. Check externally that the mount and cables are intact and the lens has a clear view. Do not force the lens or moving head.

Original images and technical drawings

Technical drawing is not installed here yet. Open the associated original manual and control model before demounting.

Check that the drawing and any variations in the original manual are consistent with the device. Sources checked 08.09.2026. The step marked as derived is not an explicit disunity instruction from the manufacturer.

Date: ________; · Battery type/number: ____________________________________________________________

Help when the product does not work

Choose the symptom and check the model scope before following the steps. This is troubleshooting, not a list of confirmed product defects.

SmartHomeSec: recording icon appears but video will not play

Applies to: Only Vesta Advanced video integrated in SmartHomeSec. Installer checks are identified below.

  1. Note the camera and event time. Check whether that time plays in the camera or NVR’s own playback.
  2. Installer: compare time, time zone and daylight saving settings on the camera/NVR with the Vesta panel. A time offset can make the system search the wrong recording period.
  3. Installer: check that continuous recording is enabled and MicroSD/HDD storage is working. An event icon does not prove that video was stored.
  4. Installer: follow the GitBook section “Event Playback Troubleshooting Guide”, including multimedia settings. Arrange a new controlled test after correction.

Check the result: A new test recording opens at the correct event time.

Stop and get help: Recordings that were never stored will not return when settings are changed. Preserve existing recordings; do not format the card or disk.

Open full guide with illustrations and sources

Sources: www.youtube.com — open documentation vesta-guide.gitbook.io — open documentation

Vesta Advanced: no image or offline camera

Applies to: For cameras/NVRs in the VESTA Advanced app. These are initial checks, not a confirmed diagnosis.

  1. Check whether all cameras are missing or only one channel. Note the device name and error text.
  2. Check that the phone has internet access. Then try another available connection, such as mobile data, and compare.
  3. Check visible power and network status at the camera/recorder without opening it. If the recorder has a local picture, tell the installer.
  4. Open the same camera again in the app. Use the app video if you are unsure how to select the camera or channel.

Check the result: Live video updates and the correct channel is selected.

Stop and get help: If local video works but the app does not, the installer must check remote connectivity and access. No dedicated official error video was found for this message; the app video demonstrates operation.

Open full guide with illustrations and sources

Sources: vesta-guide.gitbook.io — open documentation drive.google.com — open documentation

Vesta Advanced: IVS does not produce the expected events

Applies to: For cameras supporting the selected IVS rule. Configuration should be performed by the system manager or installer.

  1. Identify the camera and rule: intrusion, tripwire or cross-region. Confirm the model supports it.
  2. Open the specific IVS video below. Compare the configured area or line with what should be detected.
  3. Review rule activation and recording setup as shown in the video. Change only the agreed rule.
  4. Perform an agreed test in the specified area. Check event registration first, then recording and finally the phone notification.

Check the result: The test produces the correct event and agreed playback or notification.

Stop and get help: Do not use siren status as proof that phone notifications are enabled. Vesta documents that in version 2.5.0 the padlock controls lights/siren; notification synchronisation was not included.

Open full guide with illustrations and sources

Sources: bydemes.com — open documentation www.youtube.com — open documentation drive.google.com — open documentation vestasecurity.eu — open documentation

Find help for another product Contact support

Sources reviewed 9 September 2026. Not tested on your installation.